Alloy Steel Buttweld Fittings

Alpha Overseas is well-known in the industry for its Alloy Steel Buttweld Fittings production. Manufacturers of Alloy Steel Pipe Fittings advocate using lightweight pipe and lightweight vessel construction for advantages at direct and high temperatures. This way, hot-formed or manufactured Chrome Moly Buttweld Fittings wrapped at a temperature over 980 °C may be strengthened, normalized, and tempered.

Alloy Steel Buttweld Pipe Fittings, Chrome Moly Buttweld Pipe Fittings Dimensions, Alloy Steel Butt weld Fittings, AS Buttweld Pipe Fittings, Alloy Steel Buttweld Fittings Manufacturer, Alloy Steel Pipe Fittings, Alloy Steel Buttweld Fittings Suppliers, Chromium Molybdenum Steel Pipe Fittings Suppliers in Mumbai, India.

Numerous alloy grades, including several high and low steel grades, are included in alloy steel. The alloy Steel Buttweld Fittings can categorize as either low or high alloy steel depending on the number of alloys in the material. For instance, Low AS Pipe Fittings have an alloy level of up to 8%. In contrast to low alloy grades, high alloy steels contain alloys in amounts greater than 8%. High alloy steel typically contains iron as the remaining component, with chromium making up roughly 10% of the overall weight. As a result, compared to other alloy steels, which are low, these buttweld pipe fittings have a far higher degree of enhanced mechanical property. The qualities are frequently evident as the amount of alloying increases. Its oxidation resistance is one such quality. It shows that the alloy's high chromium concentration is responsible for this characteristic. Chromium acts as a potential corrosion inhibitor by forming a passivated oxide coating on the surface of the fittings. However, compared to their low alloy equivalents, the cost of employing a high steel buttweld fitting is marginally higher.

Chromium and molybdenum are both key alloying components in chrome-moly steel. Because of this, Chromoly Buttweld Pipe Fittings get their name from combining these two components. The SAE family of steel grades 41xx steel is one such chrome-moly steel. These fittings not only have an extraordinary strength-to-weight ratio, but they are also much more challenging and vital than standard 1020 steel. Buttweld fittings made of chromium alloy steel are difficult to weld. This steel type must be thermally tend before and after welding to prevent cold cracking.

Specification List of Alloy Steel Butt weld Fittings

Standards ASTM A234 / ASME SA234
Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
Size
  • Seamless Butt Weld Fittings : 1/2″ – 10″
  • Welded Butt Weld Fittings : 1/2″ – 48″
Type Seamless / Welded / Fabricated
Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Alloy Steel Butt weld Fittings

Manufacturing Standards of Alloy Steel Buttweld Fittings

ASME B16.9 ASTM A234 AS Fittings Factory-Made Wrought Buttwelding Fittings Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet
Crosses, Lap Joint Stub Ends, Caps, Reducers
ASME B16.28   Short Radius Elbows, Short Radius 180-deg Returns
MSS SP43 Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers
MSS SP75   Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers

Alloy Steel Butt weld Fittings Dimensional Tolerances

All Fittings
90°and 45° Ells and Tees Reducers and Lap Joint Stub Caps 180° Returns Angularity Tol
Nominal Pipe Plane Size (NPS) Outside(1) Diameter at Bevel Inside(1) Diameter at End Wall(2) Thickness Centre-to- End Dimension A,B,C,M Overall Length L Overall Length E Centre-to- Centre Dimension O Back-to- Face Dimension K Alignment at Ends U Nominal Pipe SIze Off Angle Q Off Angle P
1/2 TO 2-1/2 +1/16 ±1/32 Not less than 87-1/2% of Normal Thickness ±1/16 ±1/16 ±1/8 ±1/4 ±1/4 ±1/32 12 to 4 1/32 1/16

-1/32






5 to 8 1/16 1/8
3 TO 3-1/2 ±1/16 ±1/16 ±1/16 ±1/16 ±1/8 ±1/4 ±1/4 ±1/32 10 to 12 3/32 3/16
4 ±1/16 ±1/16 ±1/16 ±1/16 ±1/8 ±1/4 ±1/4 ±1/32 14 to 16 3/32 1/4
5 TO 8 +1/32 ±1/16 ±1/16 ±1/16 ±1/4 ±1/4 ±1/4 ±1/32 18 to 24 1/8 3/8

-1/16









10 TO 18 +1/16 ±1/8 ±3/32 ±3/32 ±1/4 ±3/8 ±1/4 ±1/16  All dimensions are in inches 

-1/8






20 TO 24 +1/4 ±3/32 ±3/32 ±3/32 ±1/4 ±3/8 ±1/4 ±1/16

-3/32






Different Types of Alloy Steel Buttweld Fittings

Alloy Steel Butt weld Elbow

Alloy Steel Buttweld Elbow

  • Chromium Molybdenum Pipe Elbow
  • Chromium Molybdenum Steel Butt weld Elbow
  • Alloy Steel Pipe Elbow
  • Alloy Steel Reducing Elbow
  • Chrome Moly Buttweld Pipe Elbow
  • Alloy Steel Elbow
  • Alloy Steel 180 Deg. Long Radius Buttweld Elbow
  • CrMo Buttweld Elbow
  • ASTM A234 Alloy Steel Buttweld Elbow
  • Cr-Mo Buttweld Elbow
  • Alloy Steel 1.5d Buttweld Elbow
  • ASME B16.9 Alloy Steel Seamless Pipe Elbow
  • Alloy Steel 90° Short Radius Elbow
  • Alloy Steel 90 Degree Elbow
  • ASME SA234 Alloy Steel Buttweld Pipe Elbow
Alloy Steel Butt weld Tee

Alloy Steel Buttweld Tee

  • Cr-Mo Buttweld Tee
  • Chromium Molybdenum Pipe Tee
  • ASME B16.9 Alloy Steel Seamless Pipe Tee
  • ASTM A234 Alloy Steel Buttweld Tee
  • ASME SA234 Alloy Steel Buttweld Pipe Tee
  • Alloy Steel Pipe Tee
  • Chrome Moly Buttweld Pipe Tee
  • Alloy Steel Tee
  • CrMo Buttweld Tee
  • Alloy Steel Buttweld Reducing Tee
  • Alloy Steel Butt weld Tee
  • Alloy Steel Buttweld Unequal Tee
  • Chrome Moly Steel Butt weld Tee
  • Alloy Steel Buttweld Equal Tee
Alloy Steel Butt weld Cross

Alloy Steel Buttweld Cross

  • Alloy Steel Buttweld Pipe Cross
  • Alloy Steel Buttweld Unequal Cross
  • Alloy Steel Cross
  • Alloy Steel Buttweld Equal Cross
  • ASME B16.9 Alloy Steel Seamless Pipe Cross
  • Alloy Steel Butt weld Cross
  • ASTM A234 Alloy Steel Buttweld Cross
  • Alloy Steel Buttweld Reducing Cross
  • Chromium Molybdenum Steel Butt weld Cross
  • ASME SA234 Alloy Steel Buttweld Pipe Cross
  • Chromium Molybdenum Pipe Cross
  • Chrome Moly Buttweld Pipe Cross
  • CrMo Butt weld Cross
  • Cr-Mo Buttweld Cross
Alloy Steel Butt weld Reducers

Alloy Steel Reducers

  • Alloy Steel Eccentric Reducer
  • Chrome Moly Steel Butt weld Reducers
  • Alloy Steel Buttweld Pipe Reducers
  • Alloy Steel Buttweld Seamless Concentric Reducers
  • Cr-Mo Buttweld Reducers
  • Alloy Steel Concentric Reducer
  • ASME B16.9 Alloy Steel Seamless Pipe Reducers
  • CrMo Reducers
  • Alloy Steel Buttweld Reducers
  • ASTM A234 Alloy Steel Reducers
  • Chromium Molybdenum Pipe Reducers
  • Chrome Moly Reducers
  • ASME SA234 Alloy Steel Buttweld Pipe Reducers
Alloy Steel Butt weld Pipe Cap

Alloy Steel Buttweld Cap

  • Chrome Moly Buttweld End Cap
  • Alloy Steel End Pipe Cap
  • Cr-Mo Butt weld Cap
  • Chromium Molybdenum Butt weld Pipe Cap
  • Alloy Steel Pipe End Cap
  • CrMo Butt weld Pipe Cap
  • ASME B16.9 Alloy Steel Buttweld Cap
  • Chromium Molybdenum Buttweld Pipe Cap
  • Alloy Steel Buttweld Seamless Pipe Cap
  • ASTM A234 Alloy Steel Pipe Cap
  • Alloy Steel Pipe Cap
  • ASME SA234 Alloy Steel Buttweld Cap
  • Alloy Steel Butt weld Pipe Cap
Alloy Steel Butt weld Stubends

Alloy Steel Stub End

  • Alloy Steel Short Stub End
  • Chrome Moly Stubends
  • ASTM A234 Alloy Steel Stub End
  • ASME SA234 Alloy Steel Buttweld Stub End
  • ASME B16.9 Alloy Steel Long Stub End
  • Chrome Moly Steel Butt weld Stubends
  • CrMo Butt weld Stubends
  • Alloy Steel Lap Joint Stubends
  • Chromium Molybdenum Buttweld Stub End
  • Alloy Steel Buttweld Stubends
  • Cr-Mo Butt weld Stub End
  • Alloy Steel Buttweld Lap Joint Stub End

Contact us to get a quick quote for your requirement.

We offer These Alloy Steel Buttweld Pipe Fittings as per DIN, ISO, JIS or ANSI / ASME Standard.

Request a Quote

Specialized in Following Alloy Steel Buttweld Fittings

  • Alloy Steel Pipe Fittings
  • Alloy Steel Fittings
  • Alloy Steel Pipe Fittings Exporters
  • ANSI/ASME B16.9 Alloy Steel Pipe Fittings Dimensions
  • Cr-Mo Pipe Fittings
  • Alloy Steel 1D, 2D, 3D, 5D Pipe Elbow
  • Alloy Steel Pipe Fittings Manufacturer in Mumbai
  • AS Butt weld Fittings Manufacturer In India
  • CrMo Pipe Bends
  • Alloy Steel Seamless Pipe Fittings
  • Alloy Steel Pipe Fittings Price List
  • Chromium Molybdenum Buttweld Fittings
  • Alloy Steel Buttweld Fittings at Best Price List In India
  • AS Buttweld Fittings Manufacturer
  • ASTM A234 Alloy Steel Pipe Fittings
  • Alloy Steel Industrial Buttweld Pipe Fittings
  • Alloy Steel Long Radius 180 Return Bends
  • Chrome Moly Butt weld Pipe Fittings
  • ASME/ANSI B16.28 Alloy Steel Buttweld Fittings
  • Alloy Steel Two Joint Pipe Fittings
  • AS Buttweld Fittings Supplier In Mumbai
  • Alloy Steel Pipe Nipple
  • Alloy Steel Seamless Buttwelding 45° and 90° Elbows
  • Alloy Steel LR / SR Elbow Wholesaler
  • Alloy Steel Buttweld Pipe Fittings Dealers in india
  • Alloy Steel Pipe Fittings Supplier
  • CrMo Buttweld Fittings
  • Alloy Steel Two Halve Butt weld Fittings
  • ASME SA234 Alloy Steel Buttweld Fittings
  • Alloy Steel Butt weld Fittings Stockist
  • AS Butt weld Fittings Exporter In India
  • Alloy Steel Welded Pipe Fittings

Applications of Alloy Steel Buttweld Fittings

Oil & Gas Industry

Oil & Gas Industry

Power Generation Industry

Power Generation Industry

Petrochemical Industry

Petrochemical Industry

Chemical Industry

Chemical Industry

Cement Industry

Cement Industry


We Export Alloy Steel Butt weld Fittings Across the Globe

United Kingdom, New Zealand, Bhutan, Portugal, Puerto Rico, Oman., Switzerland, Sri Lanka, Thailand, Azerbaijan, Saudi Arabia, Afghanistan, United Arab Emirates, Ukraine, China, Costa Rica, Norway, Ireland, Hong Kong, Czech Republic, Taiwan, Bahrain, Colombia, columbia, Vietnam, Trinidad & Tobago, Finland, Turkey, Israel, Singapore, Serbia, Netherlands, Croatia, Pakistan, Greece, Brazil, Algiera, Zimbabwe, Macau, Lahore, India, Gabon, Belgium, Japan, Egypt, Kenya, United States, Romania, Kuwait, Kazakhstan, Denmark, Peru, Namibia, Iraq, Australia, South Africa, Estonia, Iran, Indonesia, Algeria, Lebanon, Malaysia, Argentina, Jordan, South Korea, Gambia, Lithuania, Tibet, Canada, Venezuela, Belarus, Germany, Chile, Russia, Spain, Ecuador, Bulgaria, Nigeria, Mexico, Libya, Slovakia, Qatar, Morocco, Yemen, Sweden, Italy, Nepal, Mongolia, Bangladesh, Philippines, Hungary, Bolivia, Tunisia, Austria, Poland, Angola, France, Ghana.

Domestic Supply Alloy Steel Buttweld Fittings

Jamshedpur, Chennai, mumbai, Secunderabad, Pune, Faridabad, Nashik, Bhopal, Ranchi, Kanpur, Ernakulam , Kolkata, Bengaluru, Navi Mumbai, Thane, Hyderabad, Howrah, Gurgaon, Pimpri-Chinchwad, Ludhiana, Surat, Thiruvananthapuram, Nagpur, Haryana, Jaipur, Indore, Visakhapatnam, New Delhi, Noida, Chandigarh, Ahmedabad, Rajkot.